In addition to meeting MIL-Spec performance requirements of SAE-AS-83519, SUMITUBE ® STS H-M and H-ML series shield terminators provide the added benefits of increased operating temperatures, choice of color coded ground leads and different ground lead types, including metal braid.

SUMITUBE ® Special Termination Sleeve devices are offered with your choice of preinstalled lead wire insulations. The use of H-ML series parts with pre-installed ground leads means there is only one part to handle eliminating the need to spend time on positioning components. This ease of handling can reduce labor costs, give higher production yields, and eliminate the need to inventory wire or braid.

The outer heat-shrinkable jacket is a precision engineered polyvinylidene fluoride sleeve containing exactly the right amount of pre-fluxed solder to provide reliable connections time after time. Thermoplastic sealing rings at each end of the sleeve melt and flow during the shrinking process to strain-relieve and form an environmental seal that meets Mil-Spec criteria. The solder preform is coated with a special thermochromic indicator which changes color when the proper amount of heat has been applied. This serves to assist the operator during installation and inspection. All parts also have a permanent identification number marked on the exterior of the PVDF sleeves.

To determine which size terminator best meets your requirements:

1. Determine cable dimensions, either "center strip" or "end strip", using the diagrams at right.

2. Refer to cable dimension table above.

X OR XX = TERMINATOR PART NUMBER:

Refer to drawing H-M-1 thru -5 for 83519/1 applications.
Refer to drawing H-ML-1 thru -20 for 83519/2 applications with M22759/32
(irradiated ETFE) preinstalled lead.